+
  • PW-Distribution-Loop3(205).jpg
  • PW-Distribution-Loop4(206).jpg
  • WFI-Distribution-Loop1(210).jpg
  • WFI-Distribution-Loop3(208).jpg
  • WFI-Distribution-Loop2(209).jpg

WFI Distribution Loop

This system distributes purified water or water for injection to the point of use, that is, the point of application of the water, which is usually located at the edge of the water system.We also call it Clean Pipeline System.

Keywords:


Details description

The requirements of the WFI Distribution Loop
For steel pipes with a pressure of 2.5 MPa and above, the chemical composition and mechanical properties test results (including tensile strength, yield, and elongation) shall meet the requirements. WFI Distribution Loop cost The pipes used should be visually inspected before installation. Those with heavy or cracks should not be used, and there should be no significant scratches, pits, and other hard injuries. The wall thickness of the pipe should meet the design requirements. The piping used in water treatment processes should consider adequate corrosion margins.

Related to the pipeline are its accessories, such as flanges and other connectors, tees, elbows, large and small heads, and wave compensators. WFI Distribution Loop factory In the design and installation, it should be checked according to the steel grade and quality requirements of the pipe. In the case of welding, the welding wire and welding quality shall meet the requirements.

The sealing surface of the flange is required to be smooth, without radial groove marks visible to the naked eye, and the flange itself must not have burrs, pores, cracks, or other defects that may reduce the strength or connection reliability.

The bolts and nuts used for fastening require complete threads without scars and burrs, and the bolts and threads must be well matched with no jamming or loose feeling. Gaskets should be flat and slightly less rigid than flanges.
 

Product details

 

Product details Product details
Product details Product details

 

 

Exhibition

 

Exhibition Exhibition

 

Visit the factory

 

Visit the factory Visit the factory

 

 

Customer use site

 

Customer use site Customer use site

 

Shipping picture

 

Shipping picture

 

Packing and shipping

Packing and shipping
Packing and shipping
Packing and shipping
Packing and shipping

Production Base

PRODUCTION BASE
PRODUCTION BASE
PRODUCTION BASE
PRODUCTION BASE
PRODUCTION BASE
PRODUCTION BASE
PRODUCTION BASE
PRODUCTION BASE
< 12 >

FAQ

answer
We have more than 60 years in pharmaceutical water making equipment.
answer
Our factory is located in Weifang,Shandong, China.
answer
We will provide all the drawings for you to confirm before production.
answer
3 years warranty for the whole tank and the main equipment, accessories and auxiliaries.
answer
We can supply the installation. There are two options. The first option: We could appoint our engineer to your company to debug and repair, as for the cost of this trip such as ticket, visa, accommodation and labor cost shall be on your side. The second option: On-line service will be provided. If still under guarantee period, the necessary accessories and parts will be provided free, the buyer afford the transportation cost.
answer
Before the delivery, we will test and debug all machines in good condition and record the video for your checking.

If you like it, leave us a message now!

Through the above introduction, we believe that you have a sufficient understanding of us and can work with us with confidence. Please leave your information quickly, and we will send you samples or photo albums via express delivery! Attention: Our professionals will contact you as soon as possible!

Submit

Related Products