Welcome to the official website of Shandong Eagle Pharma Machinery Co.,Ltd.!
Service Hotline：+86-536-8800237
Product Center
Contact Us
Address: Block B, Headquarters Base ABP, No.2600, Zhuangjian Road.Weifang, Shandong, P.R.C.
Tel: +86-536-8800237
Email: export@sdwemac.com
WhatsApp: Naomi: 86 15315252862
100L-500LPure Steam Generator
CZQ series Pure steam generator of WEMAC is a kind of equipment that adopts purified water as raw material water and heated by industrial steam to produce clean pure steam. This series of equipment can be used for sterilization and disinfection of pharmaceutical equipment and various process production lines (pipelines, storage tanks, etc.). The pure steam condensed water produced meets the requirements of the Chinese Pharmacopoeia (CP2020), United States Pharmacopoeia (USP43), European Pharmacopoeia (EP10) for water for injection.
Keywords:
category：
Details description
Both coolers and heaters used in pure steam generator systems require sanitary heat exchangers. The confirmation content of the heat exchanger is mainly about its heat exchange capacity, whether the seal between the cooling water and pure steam is reliable, and when equipment failure occurs between the cooling water and pure steam, resulting in mutual leakage, is there any way to avoid pollution and alarm? measure.
Generally, for the use of ordinary stainless steel shell and tube heat exchangers or plate heat exchangers in pure steam generator systems, whether it is used as a heater or a cooler, the cooling water and pure steam should be considered from the design. Maintain an appropriate pressure difference between the two, that is, in the operation management, the pressure of the pure steam system should always be adjusted and controlled to be 0.10-0.15MPa higher than the cooling water pressure, so that when a leak occurs, the pure steam system will not be quickly damaged. cause serious pollution.
Of course, it is preferable to use a shell-and-tube heat exchanger or a double-wall plate heat exchanger of a double-ended tube-sheet structure similar to that used in the aforementioned distilled water machine. This is because the double-wall plate heat exchanger replaces the single-layer heat exchange plate with a double-layer heat exchange plate. When the medium leaks from the perforation above the double plate, the medium can only leak between the plates, and then from the plate and the plate. flow outside. This ensures that the two media cannot mix with each other.
(Industrial steam pressure 0.3MPa)
| Model | Capacity(L/H) | Industrial steam consumption(L/H) | Feed water consumption(L/H) | Dimentions(mm) |
| CZQ100 | ≥100 | 110 | 110 | 1200*800*2750 |
| CZQ200 | ≥200 | 220 | 220 | 1400*1000*3350 |
| CZQ300 | ≥300 | 330 | 330 | 1550*1100*3600 |
| CZQ400 | ≥400 | 440 | 440 | 1550*1100*4100 |
| CZQ500 | ≥500 | 550 | 550 | 1800*1315*3800 |
| CZQ750 | ≥750 | 825 | 825 | 1800*1315*4100 |
| CZQ1000 | ≥1000 | 1100 | 1100 | 2000*1360*4500 |
| CZQ1500 | ≥1500 | 1650 | 1650 | 2400*1510*4800 |
| CZQ2000 | ≥2000 | 2200 | 2200 | 2400*1510*4900 |
| CZQ3000 | ≥2000 | 3300 | 3300 | 2400*2100*4675 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Packing and shipping
FAQ
Related Products
