Technical characteristics

1. Structural material: The pressure vessel body and pipeline in contact with distilled water and secondary pure steam are made of stainless steel, and the sealing material is made of PTFE. Other materials including the frame of the good price and quality 100L-500LPure Steam Generator are made of stainless steel.
2. Three-stage separation device: The raw water entering the equipment is separated by three-stage separation through falling liquid film evaporation, gravity separation and special separation device.
3. Electrochemical polishing: The stainless steel surface is electrochemically polished, and the internal electrolytic polishing treatment is in line with GMP requirements. Guarantee the quality of water for injection production and improve the service life of equipment.
4. Double tube plate design: The external preheater, condenser and multi-effect evaporator are all designed with double tube plate, which meets the requirements of GMP.
5. High-quality seamless tubes are used for heat exchange tubes: seamless tubes have better strength and durability, ensuring that they remain in good condition during processing, welding, expansion, and thermal expansion and contraction during operation, ensuring that any industrial steam is avoided. , raw material water and cooling water leak into clean distilled water and secondary steam side.
6. Three-dimensional elbow: use stainless steel pipe to directly stretch the elbow on the pipeline to avoid welding.
7. Use automatic welding: For the connection between the pipeline and parts of the good price and quality 100L-500LPure Steam Generator, use automatic argon shielded track welding as much as possible to ensure the welding quality.
8. Insulation: Both the evaporator and the preheater are made of mineral wool insulation layer without chlorine and asbestos, and covered with stainless steel cladding.
9. Economical and energy-saving: Because the secondary steam is utilized step by step in each effect, the utilization rate of industrial steam is very high, and it has obvious energy-saving effect. With the increase of evaporator efficiency, the effect of this energy saving is more obvious. At the same time, the amount of cooling water is also greatly reduced with the increase of the effect number.
10. Control system: PLC automatic control technology is adopted to realize different control requirements of customers. From the most basic quality judgment and distribution of distilled water, to more advanced ones, such as continuous adjustment of various media, linkage with storage systems, hierarchical password control, and even control of evaporation changes, it can be said to be meticulous;
11. Paperless record: The paperless record is adopted to record the actual production situation;
12. Factory test of the whole machine performance: In the whole machine test workshop, according to the determined procedures, simulate the actual working environment, and carry out the whole machine test of the good price and quality 100L-500LPure Steam Generator.