+
  • 3(303).png
  • 4(304).png

LDS Series Multi-effect Water Distiller

WEMAC customized optimization design according to the raw water quality report,effluent quality requirements and the actual needs of customers, and customer can also choose the standardized design from WEMAC. The output water quality can meet the requirements of Chinese Pharmacopoeia(CP2020), United States Pharmacopoeia (USP43) and European Pharmacopoeia (EP10) for purified water or high purity water according to different system configurations.

Keywords:


Details description

WORKING PRINCIPLE

The qualified feed water is input into the condenser after increased the pressure by multilstage pump. And then enters into each preheater (the feed water will be heated by the secondary steam and distilled water in the condenser, in the fist stage preheater, the feed water heated by the industrial steam condensate water, after enters the other stages preheater, it is heated by the secondary steam condensate water). Next the feed water is input into the water dstributor of the 1st stage evaporator, which is spouted to the inside of the heating tubes and flowed as film. The produced second steam with drips enters into the gas and steam separating setting from the bottom of the heating tubes. The separated pure steam enters into the next stage as heating steam, meanwhile, the feed water, which is not evaporated, enters into the next stage. And then it is repeated above mentioned process. The pure steam from last stage is converged with each stage condensed water (except 1st stage), after cooling and drainage of the non-condensable gas, (according to different model, there should be a device for discharge the non- condensable gas continuously) it is became the WFI. There is an on -line conductivity test at the output orifice, the qualified distilled water will be output as the WFI, and the unqualified will be discharged.

   

   

 

PARAMETER  TABLE

 

Packing and shipping

Packing and shipping
Packing and shipping
Packing and shipping
Packing and shipping

Production Base

PRODUCTION BASE
PRODUCTION BASE
PRODUCTION BASE
PRODUCTION BASE
PRODUCTION BASE
PRODUCTION BASE
PRODUCTION BASE
PRODUCTION BASE
< 12 >

FAQ

answer
We have more than 60 years in pharmaceutical water making equipment.
answer
Our factory is located in Weifang,Shandong, China.
answer
We will provide all the drawings for you to confirm before production.
answer
3 years warranty for the whole tank and the main equipment, accessories and auxiliaries.
answer
We can supply the installation. There are two options. The first option: We could appoint our engineer to your company to debug and repair, as for the cost of this trip such as ticket, visa, accommodation and labor cost shall be on your side. The second option: On-line service will be provided. If still under guarantee period, the necessary accessories and parts will be provided free, the buyer afford the transportation cost.
answer
Before the delivery, we will test and debug all machines in good condition and record the video for your checking.

If you like it, leave us a message now!

Through the above introduction, we believe that you have a sufficient understanding of us and can work with us with confidence. Please leave your information quickly, and we will send you samples or photo albums via express delivery! Attention: Our professionals will contact you as soon as possible!

Submit

Related Products