1. When the Above 3000L Pure Steam Generator from China is used, it needs to discharge at least three times a week.
2. Always check whether the valve and other connections of the Above 3000L Pure Steam Generator from China are leaking.

3. The water level electrode should be kept clean. The water level electrode is an important part for starting the heater and the water pump. Therefore, in order to prevent the electrode rod of the Above 3000L Pure Steam Generator from being scaled or corroded and affecting the use effect, the electrode rod should be cleaned or replaced in time.
4. When the Above 3000L Pure Steam Generator from China is out of use, first turn off the power supply, and then close the valve after the pressure has completely dropped. If it is not used for a long time in winter, the water inside the boiler should be completely discharged to prevent the boiler from freezing.
5. When the Above 3000L Pure Steam Generator needs to be repaired, it is forbidden to carry out under pressure. It is necessary to discharge all the steam in the boiler and pipes of the Above 3000L Pure Steam Generator from China, and repair it after the pressure has completely dropped (the pointer of the pressure gauge is at "0") and the boiler body is completely cooled.
6. When the automatic control device of the Above 3000L Pure Steam Generator from China is abnormal or the operation error causes the boiler to be overheated, the operation of the boiler should be stopped immediately, and professional personnel should be sought for treatment immediately.