Nowadays, Horizontal WFI tank are used in many places. This kind of equipment is very large and cannot be disassembled and shipped. It occupies a relatively large area and has high transportation costs. In order to save freight, it is necessary to use vehicles for transportation and loading. What precautions should be taken when loading and unloading Horizontal WFI tank?

1. When the equipment reaches the destination, it can be completely unloaded. Gently put the plastic storage tank on the ground, and then use a crane or a forklift to unload these buckets. The length of the forklift arm should be paid attention to here. Must be larger than the diameter of the same body.

2. Don't shake your head when handling the equipment, and don't shake such a device, so as not to touch some protrusions.

3. Don't push the equipment truck down from the truck roughly, drag it back and forth flat on the ground, and don't hang the rope on the flange or other accessories of the tank truck to avoid loosening or falling.

4. When the Horizontal WFI tank is directly transported, it is necessary to look at the entire platform. The entire platform surface must be supported as a whole. It is forbidden to set it in the air. Confirm in advance whether there are stones or sharp objects on the platform. If there are sharp objects. Items must be cleaned in advance.

5. When the Horizontal WFI tank is transported, the nut may be loosened due to vibration. Before assembling and assembling the pipe, it must be confirmed whether there is such a situation. Once such a situation occurs, it must be adjusted in time.