A Distill water machine refers to a machine that uses distillation to prepare pure water. Distilled water can be divided into one and several times. After the water is distilled once, the non-volatile components are removed in the container, and the volatile components enter the initial fraction of distilled water, usually only the middle part of the fraction is collected, accounting for about 60%. To get purer water, add alkaline potassium permanganate solution to primary distilled water to remove organic matter and carbon dioxide; add non-volatile acid to make ammonia a non-volatile ammonium salt. Since the glass contains a small amount of water-soluble components, when performing secondary or multiple distillations, a quartz distillation vessel can be used to obtain very pure water, and the obtained pure water should be stored in a quartz or silver container.

The working principle of the Distill water machine: The production is to boil the source water and then make it evaporate and condense for recovery, which requires a lot of heat energy and the cost will not be too low. It is formed and condensed into distilled water, such as phenols that are harmful to health, benzene compounds, and even evaporable mercury. In order to obtain pure water or ultrapure water, two or three distillations must be added and other purification methods must be added.